Z SCALE D&F Tower White Skyscraper / Clock Tower / High Rise / Bell Tower

Description

Up for sale today is a Z scale Sky Scrapper based off The D&F Clock Tower
!
This was custom made by me and 3D printed in white pla. The bell tower is not glued to the model and will need to be glued. The bell tower itself has some small strands in it.
These are 3D printed building. If you look at it closely it will have layer lines. Iv done the majority of the cleanup but may need some additional cleanup/sanding. Like most 3D prints, the building may have some defects so be sure to check out the pictures. There is a small defect in the roof but unless you look at it from the top you cant see it.
About:  13 1/2 inches tall  2 1/16 inches wide & deep.
I make custom buildings! I am currently holding off on accepting new requests till covid has fully passed. Thank You! Please contact me for more information.
3D printing is not a perfect technology, the buildings may have small defects.
Be sure to check my selling page for more model railroad goodies!
Thanks for looking and please ask questions if you have any.
US only.
Note for most building - Almost all buildings I made were for requests and were specifically made to the size the requester wanted. Most building have a reduced story count to be more trainboard and economically friendly. Because the story count (height) may be reduced, the width and depth may have some windows removed so building looks realistic and not overly wide/deep. Because of this some buildings in the same area might not be proper height to one another. I can remodel most buildings to meet your needs so if you wanted something shorter or taller or in a custom size so please contact me for more info. Changing the size will ultimately change the price.