Sound Card Audio Interface Monitor Studio Recording Microphone 48V Phantom Power

Description

Sound Card Audio Interface Monitor Studio Recording Microphone 48V Phantom Power
Item Description
About this item：
Dual Microphone Interface :
The sound card has two microphone input interfaces, both of which support MIC (XLR)/LINE (TRS) input for connecting microphones or digital musical instruments, providing excellent recording quality, dynamic response and rich low frequency.
RCA input and output
:This product provides RCA input and output interface, you can use it to choose more input and output sources, such as input accompaniment. It also provides volume balance adjustment for input accompaniment and microphone, as well as internal recording function
24-bit/ 192kHz:
The device has 24-bit/ 192kHz audio resolution, high-quality conversion is the key to achieve high-quality audio, which can make your recordings clearer and better.
Ultra-low-latency listening :
Have a headphone jack, which can provide ultra-low-latency listening function, each port has a separate knob control, you can adjust the appropriate volume at any time
Easy to use:
The product does not need to install complicated drivers, and the product can be used directly by connecting the supporting USB to the product and computer. (Note: If you want to record, you need to download and use the recording software on your computer. This product supports all free recordings. software and racks)
Specification:
MIC INPUT 1-2 (balanced)：
Frequency response: -1 / -1 dB, 20 Hz - 20 kHz
Dynamic Range: 82 dB, A weighting
THD+ N 0.03 %, 1 kHz
Maximum input level: +6 dBu Input resistance 4 kΩ
Gain range: +3 dB- +60dB
HI-Z INPUT 2 (Unbalanced)
Maximum input level: +3.0 dBV
Input resistance: 1 MΩ
Gain range: 0dB - +40 dB
LINE INPUT 1/2 (balance)
Maximum input level: + 10 dBu
Input resistance: 18.5 kΩ
Gain range: -10 dB - +40 dB
MAIN OUTPUT (Impedance balance)：
Frequency response: -1 / -1 dB, 20 Hz - 20 kHz
Dynamic Range: 82 dB, A weighting
THD + N 0.03 %，1kHz,
Maximum input level: + 6 dBu
Input resistance 100 kΩ
PHONES：
Maximum input level: 15 mW + 15 mW, 40Ω
USB：
Technical specifications: full speedUSB 2.0, 24-bit,44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz
XLR INPUT：
Polarity: 1 Grounding 2: Hot wire (+) 3: Cold wire (one)
Power requirements: > 5W
Please note:
As shown below:
Turn off the return to listening in the PC volume mixer, otherwise the sound will be repetitive and accompanied by severe distortion.
After closing, click: Apply, and then click: OK.
The setting is completed.
No sound
Confirm whether the correct USB cable is used. Be sure to use the included USB cable.
Is the volume control of this device set to the correct level?
Confirm the [OUTPUT] knob and [PHONES] knob.
Are the microphone and speakers properly connected to the device?
Please refer to the "Manual" to confirm the correctness of the connection.
Is the power switch of the speaker turned on?
Make sure the switch of the speakers is turned on.
Package Contents:
1 x USB Audio interface
1 x Type A to B High Speed Cable
1 x User Manual
Payment
Please ensure the shipping address on your account is correct. If you have any address changes, please inform us on the eBay note. All orders can be canceled until they are shipped. If your order has been paid and you need to change or cancel it, you must contact us within 2 hours. Once the packaging and shipping process has started, it can no longer be canceled.
Shipping
Once we have received payment, your items will be dispatched in 1-2 days. Delivery time 7-30 days. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. If your shipment delays or you have not received your order within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
Return
We offer a 100% money-back guarantee on products that are defective or damaged during shipping. Just contact us with pictures of the damaged items. We will refund the full purchase price of your item and we will send a replacement or refund the full purchase price as preferred. We will refund you for items returned within 60 days of you receiving them, for any reason. To be eligible for a refund, your item must be unused and in the same condition that you received it. Customers will be responsible for paying shipping costs for returning items. It must also be in the original packaging. Before returning items, please contact us. To be eligible for a refund please contact us within 7 days of you receiving the item.